|
Hobby Tools
|
|
|
Part # 401
Super Stand
The Super Stand has built-in tray areas and is great for field maintenance, as a point-to-point carrier and as a building and painting tool. Perfect for use when using the Robart Model Incidence Meter.
MSRP $11.40 (ea.)
|
|
|
|
Part # 402
Super Stand II
Fully Adjustable Model Stand and Work Station.
Fits any size airplane from small gliders to Giant Warbirds. Fits any size model boat.
The Super Stand II makes for a great building platform, its sturdy, lightweight, and waterproof, and it is unaffected by glow fuel. Soft rubber pads will not harm or scratch your models.
The Super Stand II quickly sets up for any building, maintenance, or transportation needs.
MSRP $20.80 (ea.)
|
 |
|
|
Part # 404
Model Incidence Meter
This incidence meter is a must for setting proper thrust and wing/stabilizer incidences on a new model, or on one that shows some mysterious misalignment. It features an improved steel counterweight, precision pointer and anti-parallax scale, new magnified meter face and bubble level. Supplied with 18 inch meter bar. 36 inch meter bar available direct.
MSRP $42.00 (ea.)
Also Available
Part # 404029M
36 Inch Meter Bar
PRICE $15.60 (ea.)
Includes S&H
|
|
|
|
Part # 405
Helicopter Blade Pitch Meter
This model has a redesigned blade clamp for accurate meter positioning without slop. The precision pointer accurately sets heli pitch angles to within 1/8 degree. Includes flybar clamp and level.
MSRP $43.70 (ea.)
|
|
|
|
Part # 407
Surface Deflection Indicator
This device measures the amount of up/down or left/right on your model aircraft elevator, ailerons, flaps and rudder. The indicator features precise measurement of surface deflection inches and is suitable for large and small aircraft.
MSRP $9.60 (ea.)
|
|
|
|
Part # 410
Battery Operated Hobby Paint Shaker
Shakes better than by hand. Operating at 5000 shakes per minute, the Robart Hobby Paint Shaker perfectly blends paints for smooth application with brush or spray equipment. For use with 1/4 oz. to 1 oz.paint bottles.
MSRP $32.60 (ea.)
(Battery not included)
|
|
|
|
Part # 411
110 volt A/C powered Hobby Paint Shaker
Shakes better than by hand. Operating at 5000 shakes per minute, the Robart Hobby Paint Shaker perfectly blends paints for smooth application with brush or spray equipment. For use with 1/4 oz. to 1 oz.paint bottles.
MSRP $41.50 (ea.)
|
|
|
|
Part # 415
Hobby Paint Shaker Straps
Replacement rubber straps for the hobby paint shaker # 410 & # 411
MSRP $6.00 (5 pkg.)
|
|
|
|
Part # 430
All-In-One Prop Wrench
The "ALL-IN-ONE PROP WRENCH has both inch and metric sizes replacing twelve standard wrenches. The ALL-IN-ONE design helps to end flight box clutter, its large size is easy to see and hard to loose, the thin profile works on all types of prop nuts, use two for jam nut applications, and its extra long for extra torque.
The ALL-IN-ONE PROP WRENCH is heat treated tough and plated for long life.
MSRP $7.70 (ea.)
|
|
|
|
|
Robart Rough'n'Tough Carbide Cutters
|
| These cutters are made of virtually indestructible carbide on 1/8-inch steel shanks. There are seven functional shapes that won't wear out, load up, break down, or overheat. The cutters are for use in shaping all woods, plastic, fiberglass and ceramics. Fine or Coarse grits. Not recommended for use on metal. (ROB459 does not include mandrel) ROB466 Complete set of 6 Cutters (drum not included). Coarse or Fine grit |
|
|
|
Part # 459C
Drum (coarse)
MSRP $8.80 (ea.)
Part # 459F
Drum (fine)
MSRP $8.80 (ea.)
|
|
|
|
|
Part # 460C
Cone (coarse)
MSRP $8.80 (ea.)
Part # 460F
Cone (fine)
MSRP $8.80 (ea.)
|
|
|
|
|
Part # 461C
3/8" Ball (coarse)
MSRP $8.80 (ea.)
Part # 461F
3/8" Ball (fine)
MSRP $8.80 (ea.)
|
|
|
|
|
Part # 462C
1/4" Ball (coarse)
MSRP $8.80 (ea.)
Part # 462F
1/4" Ball (fine)
MSRP $8.80 (ea.)
|
|
|
|
|
Part # 463C
1/4" Rod (coarse)
MSRP $8.80 (ea.)
Part # 463F
1/4" Rod (fine)
MSRP $8.80 (ea.)
|
|
|
|
|
Part # 464C
1/8" Rod (coarse)
MSRP $8.80 (ea.)
Part # 464F
1/8" Rod (fine)
MSRP $8.80 (ea.)
|
|
|
|
|
Part # 465C
Disc (coarse)
MSRP $8.80 (ea.)
Part # 465F
Disc (fine)
MSRP $8.80 (ea.)
|
|
|
|
|
Part # 466C
6 Assorted Coarse (coarse)
MSRP $50.00 (ea.)
|
|
|
|
|
Part # 466F
6 Assorted Coarse (Fine)
MSRP $50.00 (ea.)
|
|
|
|
