 |
|
ZAP Epoxy Resins
|
|
Z-POXY QUICK SET FORMULA
|
- 5 MINUTE CURE
- CLEAR FORMULA
- TOUGH, PERMANENT BOND
- SHOCK AND VIBRATION RESISTANT
- EXCELLENT GAP FILLER
|
|
Uses:
QUICK SET Z-POXY is a premium two part epoxy adhesive. The 5 minute cure time means fast building and fast repairs. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. It does not get brittle with age and its easy to mix, just combine equal parts by volume. Handy to have at home for all types of fix-it jobs, great to have in the shop for wood working and furniture repair.
Helpful Hints:
QUICK SET Z-POXY does fully cure in approximately 5 minutes, that means you will have about 3 minutes working time. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of QUICK SET Z-POXY is not recommended. Mix Z-POXY in a plastic cup or on a non porous surface like a piece flexible plastic. Only mix enough epoxy as needed, any excess epoxy cannot be saved after it has been mixed. Since epoxies cure by an exothermic chemical reaction, ( give off heat ) and heat can speed the cure of epoxy, mixing large amounts can shorten the pot life if not spread out right away. If you need a longer working time or need to thin the epoxy, use Z-POXY 30 MIN. FORMULA part number PT-39.
Product Data Sheet
MSDS Sheet |
PT-36
1oz. (28.4ml) Zap 5 Minute Quick Shot Syringe
MSRP $4.89 (pkg.)
 |
|
|
|
- 5 MINUTE CURE
- CLEAR FORMULA
- TOUGH, PERMANENT BOND
- SHOCK AND VIBRATION RESISTANT
- EXCELLENT GAP FILLER
|
|
Uses:
QUICK SET Z-POXY is a premium two part epoxy adhesive. The 5 minute cure time means fast building and fast repairs. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. It does not get brittle with age and its easy to mix, just combine equal parts by volume. Handy to have at home for all types of fix-it jobs, great to have in the shop for wood working and furniture repair.
Helpful Hints: QUICK SET Z-POXY does fully cure in approximately 5 minutes, that means you will have about 3 minutes working time. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of QUICK SET Z-POXY is not recommended. Mix Z-POXY in a plastic cup or on a non porous surface like a piece flexible plastic. Only mix enough epoxy as needed, any excess epoxy cannot be saved after it has been mixed. Since epoxies cure by an exothermic chemical reaction, ( give off heat ) and heat can speed the cure of epoxy, mixing large amounts can shorten the pot life if not spread out right away. If you need a longer working time or need to thin the epoxy, use Z-POXY 30 MIN. FORMULA part number PT-39.
Product Data Sheet
MSDS Sheet |
PT-37
4oz. (113.6ml) Z-POXY 5 Minute
MSRP $10.69 (set)
|
PT-38
8oz. (227.2ml) Z-POXY 5 Minute
MSRP $14.59 (set)
|
|
|
|
Z-POXY 30 MINUTE FORMULA
|
- 30 MINUTE CURE
- CLEAR FORMULA
- EXTRA STRENGTH, PERMANENT BOND
- SHOCK AND VIBRATION RESISTANT
- FILLER COMPATIBLE
|
|
Uses:
30 MINUTE Z-POXY is a premium high strength two part epoxy adhesive. The 30 minute cure time allows a greater working time and increased pot life. Vibration resistant and fuel proof, this epoxy is perfect for all types of hobbies and crafts. Use it on all fire wall and engine mount installations, its perfect for attaching bulkheads and formers in epoxy glass fuselages and boat hulls. It does not get brittle with age and its easy to mix, just combine equal parts by volume. Handy to have at home for all types of fix-it jobs, great to have in the shop for all types of wood working and furniture repair.
Helpful Hints:
30 MINUTE Z-POXY does fully cure in approximately 30 minutes, that means you will have about 15 minutes working time. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of 30 MINUTE Z-POXY is possible in smaller ratios, thinning too much will alter the cured properties and may not produce an adequate bond. It is best to test the thinned epoxy, let it cure and adjust as need. Mix Z-POXY in a plastic cup or on a non porous surface like a piece flexible plastic. Only mix enough epoxy as needed, any excess epoxy cannot be saved after it has been mixed. Pot life and cure time will vary when the epoxy is thinned. Since epoxies cure by an exothermic chemical reaction, ( give off heat ) and heat can speed the cure of epoxy, mixing large amounts can shorten the pot life if not spread out right away. For a quick cure epoxy, use Z-POXY QUICK SET 5 MIN. FORMULA part numbers PT-37 and PT-38.
Product Data Sheet
MSDS Sheet |
PT-39
8oz. (227.2ml) Z-POXY 30 Minute
MSRP $14.59 (set)
|
|
|
|
Z-POXY FINISHING RESIN
|
- VERY LOW ODOR
- CLEAR FORMULA
- NON BRITTLE
- 20 TO 30 MINUTE WORKING TIME, HARD IN 3 TO 4 HOURS
- FULL CURE IN 6 TO 8 HOURS
- SANDS EASILY
|
 |
Uses:
Z-POXY FINISHING RESIN is a premium light weight two part epoxy laminating / finishing type resin. Whether fiber-glassing the center section of a wing or the entire airplane, Z-POXY is the easiest to use and best you can buy. Great for sealing model boat hulls, inside and out. Use to seal all engine and fuel tank areas. It is absolutely the best for sheeting foam wing pannels.I t will bond to itself and does not get brittle with age. Z-POXY FINISHING RESIN is easy to mix, just combine equal parts by volume. Its thinner formula is perfect as is but can be thinned if needed. Z-POXY FINISHING RESIN can also be used to seal and prepare all types of wood projects for painting.
Helpful Hints:
Z-POXY FINISHING RESIN will penetrate into porous wood, several applications may be required to fill and level the surface. Let each application cure and sand between coats. To clean up any uncured or unmixed epoxy, use alcohol, isopropyl or methanol, either will work. Thinning of Z-POXY FINISHING RESIN is possible in smaller ratios, thinning too much will alter the cured properties. It is best to test the thinned epoxy, let it cure and adjust as need. Mix Z-POXY FINISHING RESIN in a clean plastic cup or on a non porous surface like a piece flexible plastic. Only mix enough epoxy as needed, any excess epoxy cannot be saved after it has been mixed. Pot life and cure time will vary when the epoxy is thinned. For a bonding type epoxy, use Z-POXY QUICK SET 5 MIN. FORMULA part numbers PT-37 and PT-38, or
Z-POXY 30 MIN. FORMULA part number PT-39.
Product Data Sheet
MSDS Sheet |
PT-40
8oz. (227.2ml) Z-POXY Finishing Resin
MSRP $17.49 (set)
|
|
|
|
|
|
|
