 |
|
ZAP MISC. PRODUCTS
|
|
CA GLUE Z-7 DEBONDER
|
|
|
|
Uses:
Z-7 DEBONDER works to remove cured CA glues from skin, work surfaces, most plastics, and model finishes. Z-7 DEBONDER can also be used to remove adhesive left from stickers, pen and marker inks, some paints and stains, decals, correction fluids and finger nail polish. You can use Z-7 DEBONDER to weatherize and highlight your models and soften CA glue prior to sanding.
Helpful Hints:
Z-7 DEBONDER Is best applied directly from the bottle right onto the glue to be removed. Z-7 DEBONDER works by softening the glue so it can be wiped away. Several applications may be necessary to completely remove all of the glue. To remove from your fingers or other body parts, apply Z-7 DEBONDER directly on the glue let it sit for a minute or so, rub the area with your finger, wipe away the softened glue and apply additional Z-7 DEBONDER if needed. If your fingers are glued together apply Z-7 DEBONDER all around the area glued, let it work on the glue for a minute or so, then gently roll your fingers to loosen the glue, apply more and continue working the glued area until yours fingers separate. To remove from a surface, apply directly to the glue and let sit for several minutes, wipe away the softened glue and repeat the application if required. To weather your model apply debonder to a rag first and gently wipe the painted areas you wish to look worn. Although Z-7 DEBONDER will work on most materials and paints, always test on samples for compatibility.
Product Data Sheet
MSDS Sheet |
PT-16
1oz. (28.4ml) Z-7 Debonder
MSRP $4.29 (btl.)
 |
|
|
|
|
ZAP Z-ENDS
|
- 10 EXTENDER TIPS
- 12 INCHES OF MICRO-DROPPER TUBING
- WORKS WITH ALL SIZE BOTTLES OF ZAP
|
|
Uses:
Into, under, around, or through, Z-ENDS extend the length of ZAP bottle nozzles for getting into hard-to-reach areas. Use Z-ENDS for more precise control of glue placement and glue amount. Since Z-ENDS are replaceable, a clogged or damaged glue tip doesn’t mean tossing out that bottle and wasting glue. The Micro-Dropper tubing is used to deposit very small amounts of glue to the smallest of areas. The tubing fits into the open end of either the standard bottle or Z-END. The tubing comes standard at 12 inches long but can be cut as needed to suit your needs.
Helpful Hints:
Z-ENDS fit over the standard bottle ends of all ZAP glues. The tips of Z-ENDS can be cut back to deposit larger amounts of glue. Sometimes glue can build up on the outside of a Z-END, let it harden and it will pop right off leaving a clean open tip. When using the Micro-Dropper tubing let the glue wick down through to the tube end, then gently squeeze the bottle to deliver a small drop of glue.
Product Data Sheet |
PT-18
Z-Ends (10 Extender Tips & 12" of Micro Tubing)
MSRP $3.99 (10/pkg.)
|
|
|
|
|
ZAP RAIL ZIP TRACK CLEANER
|
- CORROSION INHIBITOR
- RESTORES ELECTRICAL CONDUCTIVITY
- PENETRATES EXISTING CORROSION
- WILL NOT DAMAGE PLASTICS
- PREVENTS CORROSION FOR SEVERAL MONTHS
|
|
|
RAIL ZIP is a high tech concentrated corrosion inhibitor and track cleaner. RAIL-ZIP penetrates existing corrosion layers and restores electrical conductivity to all model railroad tracks. It eliminates arching and sparking to assure total layout integrity. The uses for RAIL-ZIP extend beyond model railroading, anywhere you have electrical contacts and corrosion problems you can use RAIL-ZIP. Auto and motorcycle connectors, plugs and fuses can remain trouble free making sure your new, classic or antique electrical systems won’t cause problems. Outdoor lighting fixtures will be more reliable requiring less maintenance. Because RAIL-ZIP works chemically and not mechanically, hard to reach contacts can be easily treated.
Helpful Hints:
Apply RAIL-ZIP to a clean cloth, cotton swab, felt pad or sponge. Apply a thin even coating on the surface to be treated. Wipe up any excess RAIL-ZIP with a water dampened cloth. If one part of a connector set is not easily reached for treatment, repeated applications of RAIL-ZIP to, along with repeated insertions of the accessible connector into the set will coat both parts. For lighting fixtures, remove the bulb and apply RAIL-ZIP to the contacts of the bulb only and insert or screw into the fixture. Repeat as required to treat the fixture contacts. Wipe off all RAIL-ZIP that comes in contact with the glass surface of the bulb. Do not use on halogen type bulbs and sockets. For heavily corroded parts, allow RAIL-ZIP to work for 6 to 12 hours before restoring power to the circuit. NEVER WORK ON ANY PART OF A LIVE OR ACTIVE ELECTRICAL CIRCUIT, DO NOT APPLY RAIL-ZIP TO ANY CIRCUIT THAT IS OR MAY BE LIVE. MAKE SURE ALL POWER IS DISCONNECTED TO THE PARTS YOU WILL BE TREATING, FAILURE TO DISCONNECT THE POWER CAN RESULT IN SERIOUS INJURY OR DEATH.
Product Data Sheet
MSDS Sheet |
PT-23
1oz. (28.4ml) Rail Zip Track Cleaner
MSRP $5.39 (btl.)
|
|
|
|
|
ZAP AFTER RUN OIL
|
- CORROSION INHIBITOR
- PENETRATES EXISTING CORROSION
- PROTECTS ENGINE BEARINGS DURING STORAGE
- ONE TREATMENT LASTS FOR MONTHS
|
|
Uses:
Use AFTER RUN after every run. Most fuels we use for our models do a good job of protecting your engine while it is running, however some of the chemicals used in our fuels are corrosive. These chemicals and what they can leave behind are the main reason why our engines rust and corrode when stored, even for short periods. Adding AFTER RUN to your engine protects all of the internal parts. Since AFTER RUN is a concentrated high tech corrosion inhibitor, it will last or months. Use AFTER RUN in your chain saw and weed whacker engines when storing for the winter. Wipe down metal parts and surfaces to prevent corrosion, great for all tools left in a garage or shed. Use on bike chains and cables. Coat metal push rods for use in plastic or nylon sleeves.
Helpful Hints:
Add AFTER RUN to your engine by placing a few drops in the carb air intake for a small engine, add more for larger engines, then turn the engine over by hand 6 to 10 times to coat all of the internal parts. AFTER RUN is safe for use on all metals and will not harm plastics. Wipe up any excess AFTER RUN with a water dampened cloth. To free up sticky engines, add a few drops of AFTER RUN, turn over by hand several times and let the engine sit overnight.
Product Data Sheet
MSDS Sheet |
PT-31
1oz. (28.4ml) After Run Oil
MSRP $5.39 (btl.)
|
|
|
|
ZAP DEGREASER PARTS CLEANER
|
|
PT-66
13oz. Degreaser Parts Cleaner
MSRP $5.99 (can)
|
|
|
|
|
|
|
